integrated circuit systems, inc. general description features av9170-07 1 block diagram av9170-07revb060297p pin configuration the av9170-07 is a pll (phase-locked loop) based frequency multiplier designed for use on media vision sound boards. this clock output is 4x the input clock, it is restricted to the output divider and the vco range. the output frequency range is 1 to 12.5mhz, with an input range of 0.64 to 0.768mhz for in and 0.256 to 3.072mhz for fbin. by integrating the sensitive analog sections of the pll, such as the phase comparator, loop filter and vco, jitter is minimized and external part count is reduced. the av9170-07 is a derivative of the av9170 available from integrated circuit systems, inc. for additional information on the av9170-07 , please refer to the av9170 application note. ? single chip clock multiplier ? on-chip phase-locked loop ? low output jitter ? 5 volt only power supply ? low power cmos technology ? small 8-pin dip or soic package ? on-chip loop filter clock multiplier pin descriptions 8-pin dip or soic j-3, j-6 pin number pin name type description 1 fbin input feedback input for phase-locked loop. 2 in input input for reference clock. 3 gnd - ground. 4 nc - no connection. 5 nc - no connection. 6 nc - no connection. 7 vdd - power supply (+5v). 8 clk output clock output. ics reserves the right to make changes in the device data identified in this publication without further notice. ics advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate.
av9170-07 2 ordering information ics xxxx-ppp m x#w lead count & package width lead count=1, 2 or 3 digits w=.3 soic or .6 dip; none=standard width package type n=dip (plastic) s=soic pattern number (2 or 3 digit number for parts with rom code patterns) device type (consists of 3 or 4 digit numbers) prefix ics=standard device; gsp=genlock device; av=ics (west coast) av9170-07cn08 (8 lead plastic dip) av9170-07cs08 (8 lead soic) example: 8 - pin soic 8 - pin dip ics reserves the right to make changes in the device data identified in this publication without further notice. ics advises its customers to obtain the latest version of all device data to verify that any information being relied upon by the customer is current and accurate.
|